|
BM and BMP Series
|
| |
|
With infra-red remote control
Lift and move heavy loads without restraint
|
| |
Self contained lifting magnets:
- Powered by build-in 12V battery for at least 8 hours of operation
- Hand-held, IR remote control unit allows to operate the lifting magnet from up to 4.5 meter
|
|
High degree of safety:
|
- Bail sensor prevents magnet de-energization while lifting the load
- Dual push buttons for RELEASE
- Visual and audible alarms indicate low battery level
- Magnet cannot be turned "ON" if battery charge is too low
- Exhaustive lifting guidelines ensure a double lift capacity with respect to weight of load
|
| |
|
Typical applications:
These Battery Powered Lifting Magnets are extremely useful throughout the plant, around the yard, in receiving and shipping areas, cut-off saws, burning tables and machine tools. They have widespread applications for handling of machined components, die-blocks, smooth castings and forgings, plates, bars, pipes and structurals.
|
| |
|
High degree of comfort :
|
- Controller/battery enclosure with detachable front and back panel
- Easy access to controller and battery for installation and inspection
- Additional Lift and Release push buttons on front panel
- Led display shows battery charge level when magnet is "ON"
- Built-in, temperature compensated, automatic cut-off charger
- Pocket to store remote and mains power cord
- Clip on remote allows operator to attach to belt or pocket
|
| |
|
BMP series for both flat and round material
|
| |
 Model BMP 1800 |
| |
|
Models BM1350, BM2500 and BM5000
These models are designed to lift heavy, thick plates and blocks. The maximum lift capacity is obtained on material thicknesses of 50 mm and above and on relatively flat, machined surfaces. Model BM5000 has two independently suspended "2500" magnets to lift large objects
|
|
Model BM3600
This model is specially designed for plate lifting from 3 mm thickness and up. Provided a smooth and flat surface, this magnet will lift a plate of 2400x1800 mm of 3 mm thick and even 6x3 metres when 25 mm thick! The "tip-off" feature allows to drop excess plates in case multiple plates are picked up from a stack.
|
|
| |
 Model BM 3600 |
|
Models BMP1800 and BMP3600
These so-called bi-polar lifting magnets with V-shaped pole shoes are designed to lift both flat and round material as well as I- and H-beams, angles, channels, Tees and Zees. The maximum lift capacity is obtained on material thickness of 50 mm and above. Thanks to the good depth of field, these models cope very well with irregular surfaces.
|